Zum Hauptinhalt wechseln

Einleitung

I wasn’t able to find a replacement modem assembly online so you are on your own for that part.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.
    • Remove the Phillips #1 screw circled in the picture. Set it aside for re-assembly.

  2. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

    • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

  3. Remove the single Phillips #1 screw circled in the picture.
    • Remove the single Phillips #1 screw circled in the picture.

    • I apologize for the lack of picture quality. The only camera and lighting I had were my iPhone X´s camera and a table lamp. Lol!

  4. Disconnect the modem’s flex cable from the connector  on the logic board.
    • Disconnect the modem’s flex cable from the connector on the logic board.

    • Lift the modem assembly out of it´s place on the logic board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Mitglied seit: 28.08.2018

18.667 Reputation

21 Anleitungen geschrieben

Team

NIWOTech Mitglied von NIWOTech

Community

0 Mitglieder

0 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 7

Insgesamt: 102