Werkzeuge

Kein Werkzeug erforderlich.

Ersatzteile

  1. Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.
    • Unfortunately, I am unable to provide OG content for this step due to my Power Mac’s outer case being severely damaged. Once I get my new outer case I will update this step.

    • Lift the latch on the right side panel to reveal the internals.

      • If you are doing this on a hard surface I highly suggest you put a mat down between the door and the ground to prevent scratches.

    Kommentar hinzufügen

  2. Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
  3. Locate the PRAM battery.
    • Locate the PRAM battery.

    • The PRAM battery is usually at the top right corner of the logic board.

    Kommentar hinzufügen

    • Lift the battery out of the PRAM battery holder.

      • What I did to free the PRAM battery is I broke the plastic battery holder identical to the circled one on the other side of the PRAM battery, then I was able to free the PRAM battery. I couldn't get the PRAM battery to budge without breaking the holder.

      • Don't be worried, breaking the plastic holder won't cause much damage nor will it hinder the ability for the PRAM battery to stay in place. Only break one holder, though.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aaron Cooke

Mitglied seit 28.08.2018

14.710 Reputation

22 Anleitungen geschrieben

Team

NIWOTech Mitglied von NIWOTech

Community

0 Mitglieder

0 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 5

Letzte 30 Tage: 20

Insgesamt: 45