Einleitung
Install an Airport Extreme 802.11g card internally.
Was du brauchst
-
-
Use a coin to turn the battery locking screw 90 degrees clockwise.
-
Lift the battery out of the computer.
-
-
-
Flip down the door on the right side of the battery compartment.
-
-
-
-
Use a spudger or flathead screwdriver to disconnect the Airport antenna from the card.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
14 weitere Personen haben diese Anleitung absolviert.