Zum Hauptinhalt wechseln

PowerBook G4 Titanium Onyx Airport Card Replacement

Was du brauchst

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  1. PowerBook G4 Titanium Onyx Airport Card Replacement: Schritt 2, Bild 1 von 1
    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  2. PowerBook G4 Titanium Onyx Airport Card Replacement: Schritt 3, Bild 1 von 1
    • Your laptop should look approximately like this.

  3. PowerBook G4 Titanium Onyx Airport Card Replacement, Airport Card: Schritt 4, Bild 1 von 1
    • Skip this step if your computer does not have an Airport card.

    • Firmly grasp the plastic tab attached to the Airport card and pull up and to the left.

    • Disconnect the antenna cable from the left side of the Airport card.

Abschluss

To reassemble your device, follow these instructions in reverse order.

6 weitere Nutzer:innen haben diese Anleitung absolviert.

Angehängte Dokumente

iRobot

Mitglied seit: 09/24/09

1 Reputation

636 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 10

Insgesamt: 9,608