Zum Hauptinhalt wechseln

Was du brauchst

    • Turn the G4 over.

    • Remove the eight T8 Torx screws from the lower case.

  1. PowerBook G4 Titanium Onyx Lower Case Replacement: Schritt 2, Bild 1 von 1
    • Using your thumbs, slide the lower case away from you.

    • The lower case may stick in the front on a tab just above the center of the DVD drive. Be careful as you work the case off, or you may break the thin strip of plastic just above the drive.

    • Lift the lower case off.

  2. PowerBook G4 Titanium Onyx Lower Case Replacement: Schritt 3, Bild 1 von 1
    • Your laptop should look approximately like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Angehängte Dateien

iRobot

Mitglied seit: 24.09.2009

1 Reputation

646 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 1

Letzten 30 Tage: 6

Insgesamt: 3,986