Einleitung

This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.

  1. Unscrew the screw on the back of the product.
    • Unscrew the screw on the back of the product.

  2. Pull out the backtab of the housing.
    • Pull out the backtab of the housing.

    • Push in the snapfits with, for instance, a screwdriver.

    • Separate the housing with calibrated force.

    • Keep your fingers away from the housing and do not bend or break the housing.

    • Use a flathead screwdriver to push out the lower function button.

    • Remove the separating device.

    • Unscrew the hidden screw under the button.

    • Open the housing.

    • Unscrew the circuit board.

    • Unscrew the wire lock.

    • Push the housing of the button out of the housing.

    • Push on the side of the housing of the button to push the button out of the housing.

    • The spring can jump away when you push out the button.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jorma van Dalen

Mitglied seit 07.03.2018

175 Reputation

1 Anleitung geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 51