Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

RIDGID R84015 X2 Disassembly

Was du brauchst

  1. RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 1 von 2 RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 2 von 2
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Disassembly: Schritt 2, Bild 1 von 1
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Disassembly: Schritt 3, Bild 1 von 2 RIDGID R84015 X2 Disassembly: Schritt 3, Bild 2 von 2
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. RIDGID R84015 X2 Disassembly, RIDGID R84015 X2 Disassembly: Schritt 4, Bild 1 von 1
    • With your drill taken apart, move your attention to the trigger and forward reverse switch.

  5. RIDGID R84015 X2 Disassembly: Schritt 5, Bild 1 von 1
    • Check to see that the forward reverse switch isn't broken.

    • NOTE: small tab on trigger fits into groove on forward reverse switch

  6. RIDGID R84015 X2 Disassembly: Schritt 6, Bild 1 von 1
    • With the battery attached, check that the wires work when the trigger is pulled.

    • Put multimeter wires here.

    • If wires work and drill doesn't, the problem is with the motor.

  7. RIDGID R84015 X2 Disassembly: Schritt 7, Bild 1 von 1
    • Make sure plastic is not broken and switch is not stuck.

  8. RIDGID R84015 X2 Disassembly: Schritt 8, Bild 1 von 1
    • Looks good, doesn't it?

Ziellinie

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Brian

Mitglied seit: 04/12/10

97 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 15-48, Garner Spring 2010 Mitglied von Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Mitglieder

10 Anleitungen geschrieben

Ein Kommentar

I was able to diagnose and fix my problem with my black and decker following your instructions. TY

boxingchaos2011 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 29

Insgesamt: 13,530