Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

RIDGID R84015 X2 Speed Switch Replacement

Was du brauchst

  1. RIDGID R84015 X2 Speed Switch Replacement, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 1 von 2 RIDGID R84015 X2 Speed Switch Replacement, RIDGID R84015 X2 Case Removal: Schritt 1, Bild 2 von 2
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Speed Switch Replacement: Schritt 2, Bild 1 von 1
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Speed Switch Replacement: Schritt 3, Bild 1 von 2 RIDGID R84015 X2 Speed Switch Replacement: Schritt 3, Bild 2 von 2
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. RIDGID R84015 X2 Speed Switch Replacement, Speed Switch: Schritt 4, Bild 1 von 1
    • Locate small metal bar above plastic part of drill.

    • Attempt to move bar back and forth. If it wont move, try to move it while rotating the chuck. If it still will not move, there is a problem with the gears. For help see the Planetary Gear Replacement Guide

  5. RIDGID R84015 X2 Speed Switch Replacement: Schritt 5, Bild 1 von 2 RIDGID R84015 X2 Speed Switch Replacement: Schritt 5, Bild 2 von 2
    • If the bar moves, next check the small plastic switch that is numbered 1 and 2.

    • Make sure the small tabs on the underside of the switch that move the bar are intact.

    • Replace switch as needed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Evan Long

Mitglied seit: 04/15/10

262 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 15-48, Garner Spring 2010 Mitglied von Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 10

Insgesamt: 3,598