Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will show you how to remove a broken or malfunctioning pedal and replace it with a new one for your Raleigh M20.
Was du brauchst
-
-
Use an 8" adjustable crescent wrench to fit it into the base of the pedal.
-
-
-
-
Twist the the wrench in a counter -clockwise direction to unscrew the right-side pedal (The chain side).
-
Repeat the process on the other side with a clockwise direction.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.