Einleitung

This guide will help you replace the connection strip between the side buttons on the outer casing and the mouse itself. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.

Ersatzteile

Kein Ersatzteil erforderlich.

Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
  • Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.

Kommentar hinzufügen

Remove the four 7mm screws using a Phillips head #00 screwdriver.
  • Remove the four 7mm screws using a Phillips head #00 screwdriver.

Kommentar hinzufügen

  • Gently remove the top plastic plate of the mouse.

  • Unplug the white cord from the circuit board.

Kommentar hinzufügen

  • Lightly pull the two plastic sides of the mouse to remove them.

Kommentar hinzufügen

  • Flip back the black plastic that holds the white connection strip in place on the side panel and the main panel.

Kommentar hinzufügen

  • Gently remove the white connection strip at each end.

Kommentar hinzufügen

  • Insert the blue striped ends into the white connection port on the mainframe as well as the frame with the buttons.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Laura Rubisch

Mitglied seit 29.01.2018

100 Reputation

1 Anleitung geschrieben

Team

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 41

Insgesamt: 151