Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will help you replace the top outer casing of the mouse that holds some of the electronics for the LED lighting. Be sure to use caution when unplugging the wires, for this could result in the mouse not working properly. Also use caution when removing the plastic shell, it is fragile and it could be cracked upon removal.
Was du brauchst
-
-
Peel back the two teflon tape from the top corners and the one larger one from the bottom with a spudger.
-
-
-
-
Gently remove the top plastic plate of the mouse.
-
Unplug the white cord from the circuit board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
University of Alabama, Team S1-G2, Bedsole Spring 2018 Mitglied von University of Alabama, Team S1-G2, Bedsole Spring 2018
UA-BEDSOLE-S18S1G2
4 Mitglieder
5 Anleitungen geschrieben
2 Kommentare
do you know where i can get a new top body section? i have a molten that stopped left clicking on every click, i opened it up and the plastic pretty much was worn away
