Einleitung

To begin, make sure to remove the battery before doing anything else.

Make sure that the computer is turned off and is disconnected from external power source.
  • Make sure that the computer is turned off and is disconnected from external power source.

  • Turn it upside down and locate the battery release switch.

Introduction: Parts: Need to add the Fan Part Numbers

Original equipment: CPU Fan DC28A000820, GPU Fan DC28A000920

John Frazier - Antwort

While holding the switch in the open position, lift out the battery.
  • While holding the switch in the open position, lift out the battery.

  • If you plan to work on any internal laptop components, press and hold the power button for 5 seconds. This will dissipate any residual charge on the motherboard to prevent electrical shock when you begin to handle it.

Kommentar hinzufügen

  • Remove the two Phillips #1 screws on the left side of the computer, just above the battery compartment.

  • These screws hold the hard drive tray into the hard drive compartment.

Kommentar hinzufügen

  • Slide the hard drive tray out of the hard drive compartment.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Malik Shahbal

Mitglied seit 05.10.2010

429 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 22-5, Maness Fall 2010 Mitglied von Cal Poly, Team 22-5, Maness Fall 2010

CPSU-MANESS-F10S22G5

4 Mitglieder

11 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 10

Letzte 30 Tage: 44

Insgesamt: 18,255