Zum Hauptinhalt wechseln

Remove the Screen

Was du brauchst

  1. Remove the Screen, Remove Screws: Schritt 1, Bild 1 von 3 Remove the Screen, Remove Screws: Schritt 1, Bild 2 von 3 Remove the Screen, Remove Screws: Schritt 1, Bild 3 von 3
    • Remove the screws from the bottom, right, and left side of camera.

  2. Remove the Screen, Remove back: Schritt 2, Bild 1 von 1
    • Remove the back of the camera, this may require force.

  3. Remove the Screen, Remove Metal Bracket: Schritt 3, Bild 1 von 1
    • Unscrew the right metal bracket of the viewing lens

  4. Remove the Screen, Remove front of camera: Schritt 4, Bild 1 von 1
    • Unscrew the top right corner screw

  5. Remove the Screen: Schritt 5, Bild 1 von 1
    • Unscrew the bottom right corner screw.

  6. Remove the Screen: Schritt 6, Bild 1 von 2 Remove the Screen: Schritt 6, Bild 2 von 2
    • Pull the grey circular facet that sits on the bottom outside of the camera off - may have to use force.

  7. Remove the Screen: Schritt 7, Bild 1 von 2 Remove the Screen: Schritt 7, Bild 2 von 2
    • Pull the front of the camera off of the mother board.

  8. Remove the Screen, Remove the Screen: Schritt 8, Bild 1 von 1
    • Unhinge the outer case of the screen from the back of the camera. The screen should still be hanging by wires.

  9. Remove the Screen: Schritt 9, Bild 1 von 1
    • Remove outer case/rim of screen from the back of the camera. The screen should still be hanging by the red wire and white wire.

  10. Remove the Screen: Schritt 10, Bild 1 von 1
    • Pull out the red wire and white wire attaching the screen to the motherboard.

  11. Remove the Screen: Schritt 11, Bild 1 von 1
    • Flip up black lever holding data cable to motherboard, and remove data cable from motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Eine weitere Person hat diese Anleitung absolviert.

Melissa

Mitglied seit: 02/12/13

240 Reputation

2 Anleitungen geschrieben

Team

Ohio State, Team 1-2, Buehl Spring 2013 Mitglied von Ohio State, Team 1-2, Buehl Spring 2013

OSU-BUEHL-S13S1G2

2 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 15

Insgesamt: 408