Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

Use this guide to remove the front wheel from a Nishiki Aero II Road Bike or similar bikes that use a bolt-on axle. Commonly found on older bikes or single speed city bikes. This guide is not for quick release or thru axles. Bolt-on axles are great for bikes that require simplicity and are better at stopping bike wheel theft because they take longer to remove compared to quick release axles. It is critical that this is done correctly, if not it can result in serious injury to the drop outs on the bike and to the rider if the wheel comes off due to improper installation.

Before using this guide make sure you have the correct size replacement 700c front wheel that has a bolt-on axle.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Turn bike upside down.
    • Turn bike upside down.

  2. Use a wrench to loosen the nut holding the wheel's axle on one side.
    • Use a wrench to loosen the nut holding the wheel's axle on one side.

    • Once it's loose enough, continue removing the nut with your hand.

  3. After removing the nut, also remove the washer under it. Keep note of how the washer has a small appendage that locks into a slot in the fork.
    • After removing the nut, also remove the washer under it.

    • Keep note of how the washer has a small appendage that locks into a slot in the fork.

  4. Use the same steps for opposite side.
    • Use the same steps for opposite side.

  5. Lift the wheel up from the fork.
    • Lift the wheel up from the fork.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tobias Elder

Mitglied seit: 25.04.2013

113 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 21-53, Johann Spring 2013 Mitglied von Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 7

Letzten 30 Tage: 30

Insgesamt: 514