Repariere deine Sachen Community Store

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Removing Nishiki Aero II Tire

Was du brauchst

  1. Removing Nishiki Aero II Tire, Removing Road Bike Front Wheel: Schritt 1, Bild 1 von 1

    • Turn the bike upside down.

    Übersetzen

  2. Removing Nishiki Aero II Tire: Schritt 2, Bild 1 von 1

    • Use a wrench to loosen the nut holding the wheel's axle on one side.

    • Once it's loose enough, continue removing the nut with your hand.

    Übersetzen

  3. Removing Nishiki Aero II Tire: Schritt 3, Bild 1 von 2 Removing Nishiki Aero II Tire: Schritt 3, Bild 2 von 2

    • After removing the nut, also remove the washer under it.

    • Keep note of how the washer has a small appendage that locks into a slot in the fork.

    Übersetzen

  4. Removing Nishiki Aero II Tire: Schritt 4, Bild 1 von 1

    • Follow the previous steps for the opposite side.

    Übersetzen

  6. Removing Nishiki Aero II Tire: Schritt 5, Bild 1 von 1

    • Lift the wheel up from the fork.

    Übersetzen

  7. Removing Nishiki Aero II Tire, Removing Nishiki Aero II Tire: Schritt 6, Bild 1 von 2 Removing Nishiki Aero II Tire, Removing Nishiki Aero II Tire: Schritt 6, Bild 2 von 2

    • Unscrew cap from air valve.

    • Use a thin object to press down the pin in the center of the valve, releasing the air in the tire.

    • Note: We use a hex wrench in this picture, but you can use pretty much any blunt object that fits.

    Übersetzen

  8. Removing Nishiki Aero II Tire: Schritt 7, Bild 1 von 3 Removing Nishiki Aero II Tire: Schritt 7, Bild 2 von 3 Removing Nishiki Aero II Tire: Schritt 7, Bild 3 von 3

    • Take a tire lever, and wedge it between the tire and the rim. Make sure the end scoops inward to grab the tire.

    • Once you manage to grab the edge of the tire with the lever, pull the lever back to scoop the tire out of the rim.

    • Then, use the notch in the other end of the lever to keep it steadily anchored on a nearby spoke.

    Übersetzen

  9. Removing Nishiki Aero II Tire: Schritt 8, Bild 1 von 2 Removing Nishiki Aero II Tire: Schritt 8, Bild 2 von 2

    • Do the same thing with another tire lever about 5 inches away from the first.

    Übersetzen

  10. Removing Nishiki Aero II Tire: Schritt 9, Bild 1 von 3 Removing Nishiki Aero II Tire: Schritt 9, Bild 2 von 3 Removing Nishiki Aero II Tire: Schritt 9, Bild 3 von 3

    • Do the same with a third tire lever even farther around the tire.

    • Then, leapfrog the second and third levers until the tire comes partway off.

    Übersetzen

  11. Removing Nishiki Aero II Tire: Schritt 10, Bild 1 von 3 Removing Nishiki Aero II Tire: Schritt 10, Bild 2 von 3 Removing Nishiki Aero II Tire: Schritt 10, Bild 3 von 3

    • Now, use the tire levers to wedge the tire off the other rim. This will be far easier than for the first rim.

    • As you do this, make sure you pull the air valve out through its hole in the rim.

    • Now, the tire (with the tube inside) should be completely removed from the rim.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 8 anderen Mitwirkenden

Tobias Elder

Mitglied seit: 04/25/13

113 Reputation

7 Anleitungen geschrieben

Auszeichnungen: 6

+ 3 weitere Auszeichnungen

Team

Cal Poly, Team 21-53, Johann Spring 2013 Mitglied von Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 9

Insgesamt: 1,213