Zum Hauptinhalt wechseln

Removing PowerMac G4 M5183 DVD-ROM Drive Tray

Was du brauchst

  1. Removing PowerMac G4 M5183 DVD-ROM Drive Tray, Opening PowerMac G4 M5183 Case: Schritt 1, Bild 1 von 2 Removing PowerMac G4 M5183 DVD-ROM Drive Tray, Opening PowerMac G4 M5183 Case: Schritt 1, Bild 2 von 2
    • Pull on outer latch.

    • Lower door until it is level with your work surface.

    • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

  2. Removing PowerMac G4 M5183 DVD-ROM Drive Tray, DVD-ROM Drive: Schritt 2, Bild 1 von 2 Removing PowerMac G4 M5183 DVD-ROM Drive Tray, DVD-ROM Drive: Schritt 2, Bild 2 von 2
    • Removing the faceplate.

    • On the inside of the case, find the two plastic tabs.

    • While depressing the tabs, remove the faceplate by pulling and rotating outward.

  3. Removing PowerMac G4 M5183 DVD-ROM Drive Tray: Schritt 3, Bild 1 von 1
    • Remove the two screws on the front of the drive with the Phillips #1 screwdriver.

  4. Removing PowerMac G4 M5183 DVD-ROM Drive Tray: Schritt 4, Bild 1 von 3 Removing PowerMac G4 M5183 DVD-ROM Drive Tray: Schritt 4, Bild 2 von 3 Removing PowerMac G4 M5183 DVD-ROM Drive Tray: Schritt 4, Bild 3 von 3
    • Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.

    • Remove both the power and ribbon cable.

Ziellinie

26 weitere Nutzer:innen haben diese Anleitung absolviert.

Justin Petrilli

Mitglied seit: 01/21/10

3.114 Reputation

11 Anleitungen geschrieben

Team

Cal Poly, Team 13-24, Maness Winter 2010 Mitglied von Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 Mitglieder

25 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 8

Letzte 30 Tage: 46

Insgesamt: 10,539