Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Removing the Apple Cinema Display M8149 Display Hinge

Was du brauchst

  1. Removing the Apple Cinema Display M8149 Display Hinge, Display Hinge: Schritt 1, Bild 1 von 3 Removing the Apple Cinema Display M8149 Display Hinge, Display Hinge: Schritt 1, Bild 2 von 3 Removing the Apple Cinema Display M8149 Display Hinge, Display Hinge: Schritt 1, Bild 3 von 3
    • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

    • Flip the Cinema Display so it is on its face and the feet are pointed away from you.

    • Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).

    • Remove the back foot from the hinge mount by gently pulling it upwards.

  2. Removing the Apple Cinema Display M8149 Display Hinge: Schritt 2, Bild 1 von 3 Removing the Apple Cinema Display M8149 Display Hinge: Schritt 2, Bild 2 von 3 Removing the Apple Cinema Display M8149 Display Hinge: Schritt 2, Bild 3 von 3
    • Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.

    • Lift the back plate off of the display.

    • Completely remove the back plate and set it aside.

  3. Removing the Apple Cinema Display M8149 Display Hinge: Schritt 3, Bild 1 von 2 Removing the Apple Cinema Display M8149 Display Hinge: Schritt 3, Bild 2 von 2
    • Remove the Apple Display Connector plate screws (9.52 x 3.43 mm) with the PH 2 screwdriver.

    • Once the two screws have been removed, move the cord out of the way.

  4. Removing the Apple Cinema Display M8149 Display Hinge: Schritt 4, Bild 1 von 3 Removing the Apple Cinema Display M8149 Display Hinge: Schritt 4, Bild 2 von 3 Removing the Apple Cinema Display M8149 Display Hinge: Schritt 4, Bild 3 von 3
    • Remove the hinge plate screws (5.52 x 3.43 mm) with the PH 2 screw driver.

    • Then lift out the hinge mount.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Cal Poly, Team 10-41, Forte Spring 2011 Mitglied von Cal Poly, Team 10-41, Forte Spring 2011

CPSU-FORTE-S11S10G41

5 Mitglieder

12 Anleitungen geschrieben

Ein Kommentar

in 2023 where can I get a replacement stand?

Mitch Leung - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 25

Insgesamt: 7,779