Zum Hauptinhalt wechseln

Einleitung

Learn how to get to the interior of a Logitech Webcam Pro 9000. There are a few extra wires, so be careful not to pull the covers apart too quickly.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the two 8mm Phillips#0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
    • Remove the two 8mm Phillips#0 screws on the back cover.

    • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. Apple Watch Kits

    Display und Akku Reparatur - jetzt noch einfacher.

    Jetzt kaufen

    Apple Watch Kits

    Display und Akku Reparatur - jetzt noch einfacher.

    Jetzt kaufen
  3. Remove the four 6mm Phillips#0 screws  connecting the motherboard and front cover. DO NOT detach the wire connecting the motherboard to the front cover.
    • Remove the four 6mm Phillips#0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Timothy Forrest

Mitglied seit: 18.04.2013

19 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 12-34, Amido Spring 2013 Mitglied von Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 787