Repariere deine Sachen Community Store

Logitech Webcam Pro 9000 Front and Back Cover Replacement

Einleitung

Learn how to get to the interior of a Logitech Webcam Pro 9000. There are a few extra wires, so be careful not to pull the covers apart too quickly.

Was du brauchst

  1. Logitech Webcam Pro 9000 Front and Back Cover Replacement, Front and Back Cover: Schritt 1, Bild 1 von 2 Logitech Webcam Pro 9000 Front and Back Cover Replacement, Front and Back Cover: Schritt 1, Bild 2 von 2

    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard connects the two covers together. DO NOT separate the two yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

    Bearbeiten

  3. Logitech Webcam Pro 9000 Front and Back Cover Replacement: Schritt 2, Bild 1 von 2 Logitech Webcam Pro 9000 Front and Back Cover Replacement: Schritt 2, Bild 2 von 2

    • Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 11 anderen Mitwirkenden

Timothy Forrest

Mitglied seit: 04/18/13

19 Reputation

2 Anleitungen geschrieben

Auszeichnungen: 6

+ 3 weitere Auszeichnungen

Team

Cal Poly, Team 12-34, Amido Spring 2013 Mitglied von Cal Poly, Team 12-34, Amido Spring 2013

CPSU-AMIDO-S13S12G34

4 Mitglieder

16 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 1,234