Einleitung

In this guide you will be removing the side case doors. This is a necessary step to replace every other component on the HP Compaq dx2000MT.

  1. Turn off your computer and remove the power cable by pulling it straight out of its socket.
    • Turn off your computer and remove the power cable by pulling it straight out of its socket.

    Kommentar hinzufügen

  2. Remove the 2 Phillips #2 screws that secure the case door to the device.
    • Remove the 2 Phillips #2 screws that secure the case door to the device.

    Kommentar hinzufügen

    • Remove the side case door by pushing towards the rear of the device with your hand.

      • This may take considerable force so keep pushing!

    • Once you slide the door back, remove it by pulling it outwards from the device.

    Kommentar hinzufügen

    • Remove the side case door by pushing towards the rear of the device with your hand.

      • Once again, this may take considerable force.

    • Once you slide the door back, remove it by pulling it outwards from the device.

    it’s useless my friends

    bisous sur les fesses de ta mamaa

    Albert einstein - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Logan Pace

Mitglied seit 12.10.2011

2.020 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 17-16, Regan Fall 2011 Mitglied von Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Mitglieder

17 Anleitungen geschrieben

Good , trying an apps

Nur Izzatie - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 1,557