Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

From use and abuse, the bottoms of the mouse buttons can wear down and become unable to click the digital buttons inside the mouse.

  1. Flip the mouse over and peel off the stickers on the perimeter of the bottom of the mouse
    • Flip the mouse over and peel off the stickers on the perimeter of the bottom of the mouse

    my mouse sucks i peeled off the tape and there is a layer of something blocking the the screw it is a gaming mouse and i got it 2 weeks ago

    Nathan Swercewski - Antwort

    My mouse does not have any screws on it what do I do

    Blakemoller - Antwort

  2. Use the Phillips #1 screwdriver to unscrew the six round head screws on the bottom of the mouse. Those marked with squares are 9 mm in length, the rest are 5 mm in length. Use the Phillips #1 screwdriver to unscrew the six round head screws on the bottom of the mouse. Those marked with squares are 9 mm in length, the rest are 5 mm in length.
    • Use the Phillips #1 screwdriver to unscrew the six round head screws on the bottom of the mouse. Those marked with squares are 9 mm in length, the rest are 5 mm in length.

  3. Grab the top shell of the mouse and lift up to remove. Grab the top shell of the mouse and lift up to remove. Grab the top shell of the mouse and lift up to remove.
    • Grab the top shell of the mouse and lift up to remove.

  4. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  5. The capacitors on this board can release stored electrical energy if touched.
    • The capacitors on this board can release stored electrical energy if touched.

    • Touch your capacitor discharge tool to the capacitor leads on the board to release the stored energy. If leads are inaccessible, wait until you've removed the board from the mouse body.

  6. To remove the white wire connector on the bottom board, use a spudger underneath the white plug and pop it out (this disconnects the upper board from the lower board). To remove the white wire connector on the bottom board, use a spudger underneath the white plug and pop it out (this disconnects the upper board from the lower board).
    • To remove the white wire connector on the bottom board, use a spudger underneath the white plug and pop it out (this disconnects the upper board from the lower board).

  7. Remove the 5 mm round head screw holding the middle piece to the top piece.
    • Remove the 5 mm round head screw holding the middle piece to the top piece.

    • The outermost shell will now separate from the middle structure.

  8. Take the plastic buttons (the part that your fingers click) and flip them over. On the bottom, there should be little plastic towers. Wearing these down can prevent the buttons from clicking properly.
    • Take the plastic buttons (the part that your fingers click) and flip them over.

    • On the bottom, there should be little plastic towers. Wearing these down can prevent the buttons from clicking properly.

  9. File the bottoms of these towers flat to remove any ridges that prevent proper clicking. Make sure to file down both towers. In this image, one is left un-filed to show the difference.
    • File the bottoms of these towers flat to remove any ridges that prevent proper clicking.

    • Make sure to file down both towers. In this image, one is left un-filed to show the difference.

    • This process can also be used for the other buttons on the mouse. Use other guides to disassemble the mouse until the desired button is accessible, and then perform the same filing technique.

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer haben diese Anleitung absolviert.

David

Mitglied seit: 16.01.2013

776 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 18-36, Regan Winter 2013 Mitglied von Cal Poly, Team 18-36, Regan Winter 2013

CPSU-REGAN-W13S18G36

3 Mitglieder

8 Anleitungen geschrieben

Thanks, worked like a charm.

Michael Beckman - Antwort

What if my gaming mouse doesnt have screws??

k2snakalle123 - Antwort

yep no screws……….so am screwed

Nav Dugal -

Really a great help!

Aman Kashyap - Antwort

What mouse is this? i need the little back box that does the clicking, its what you’re mouse button presses on when you click ya mouse button, any idea where i can get one?

initman01 - Antwort

Fixed the unclickable button, thanks.. but the wireless mouse stopped working (red diode doesn’t even produce a light).

It stopped all of a sudden (over night, not while I was doing something). It’s not batteries. Can someone help me or it’s dead?

Viperision - Antwort

Good tutorial. Initially I thought it was about the mouse/rat poison https://bestratpoison.org/ tutorial. But, later I realize it’s not :D

kytonk - Antwort

wow, this is pretty helpful… My friend and i work for mouse and rat poison , rat trap firm https://bestratremoval.com

b_boyew - Antwort

Great guide! useful on my logitech m585 mouse too!

Initially my mouse keeps releasing in the middle of dragging something. After following this guide, it works like brand new!

Richard Huang - Antwort

What kind of Omron switches do I need for a Razer Basilisk?

JAY LEE - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 17

Letzten 7 Tage: 299

Letzten 30 Tage: 1,631

Insgesamt: 76,064