Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will show how to replace the speaker on the Casio camera
Was du brauchst
-
-
-
Flip open the connector holding the ribbon.
-
Pull out the LCD screen with the ribbon from the camera.
-
-
-
Remove two screws on the side where the battery is located.
-
Remove the lanyard loop after the screws come off.
-
Slowly pull the side casing so it becomes dislocated from the top of the camera frame.
-
-
-
On the front of the camera near the flash flip the connector holding the ribbon.
-
Remove the ribbon from the connector.
-
-
-
Carefully remove the L shaped frame from the camera
-
At the bottom of the camera the L shaped frame is being held in by two plastic bumps and a metal tab.
-
Pop the frame off the bumps and tabs.
-
Note: There is a yellow and orange wire soldered onto the camera. Be careful not to pull them off.
-
The blue box is the speaker
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.