Einleitung

Component teardown of Gateway 420GR desktop. This machine originally shipped with Windows XP.

Dieser Teardown ist keine Reparaturanleitung. Um dein Gateway 420GR zu reparieren, verwende unsere Fehlerbehebungsseite.

  1. The left panel of the case has thumbscrews that release the left side from the case.
    • The left panel of the case has thumbscrews that release the left side from the case.

  2. Loosen the first thumbscrew
    • Loosen the first thumbscrew

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Loosen the second thumbscrew.
    • Loosen the second thumbscrew.

  5. The side panel will now slide toward the back of the case.
    • The side panel will now slide toward the back of the case.

  6. System RAM
    • System RAM

    • USB headers for front panel USB ports.

    • CMOS battery

  7. Pair one RAM retention clips.  There are two (one on each end) for each of the available slots.
    • Pair one RAM retention clips. There are two (one on each end) for each of the available slots.

    • Pair two RAM retention clips. There are two (one on each end) for each of the available slots.

    • RAM should be paired (same size) and the machine support up to 4GB or RAM as 1GB modules in each of the 4 slots.

    • System supported RAM is 184-pin DIMM DDR PC3200

kyle23

Mitglied seit: 22.04.2010

182 Reputation

1 Anleitung geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 12

Insgesamt: 2,519