Zum Hauptinhalt wechseln

Repairing Pioneer R1 Speaker Cables

Was du brauchst

  1. Repairing Pioneer R1 Speaker Cables, Repairing Pioneer R1 Speaker Cables: Schritt 1, Bild 1 von 1
    • Insert your plastic spudger into the opening near the HDMI port.

    • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1. You may further damage the cables connecting the speakers to the motherboard.

  2. Repairing Pioneer R1 Speaker Cables: Schritt 2, Bild 1 von 1
    • Lay the R1 flat like an open book.

    • This will prevent further damage to the cables connecting the speakers to the motherboard.

  3. Repairing Pioneer R1 Speaker Cables: Schritt 3, Bild 1 von 2 Repairing Pioneer R1 Speaker Cables: Schritt 3, Bild 2 von 2
    • Solder the black cable of the left speaker to the nodule marked L+ on the motherboard.

    • Do not allow solder from one nodule to touch another nodule. This will cause the speakers to malfunction.

    • Solder the black cable of the Right speaker to the nodule marked R+ on the motherboard.

    • Solder the red cable of the left speaker to the nodule marked L- on the motherboard.

    • Solder the red cable of the right speaker to the nodule marked R- on the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

San Diego State, Team 1-1, Sheppard Winter 2015 Mitglied von San Diego State, Team 1-1, Sheppard Winter 2015

SDSU-SHEPPARD-W15S1G1

3 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 142