Ersatzteile

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Kommentar hinzufügen

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Kommentar hinzufügen

Continue to pull the components apart. For reassembly, put the silver encasing on before the the black cover. For reassembly, put the silver encasing on before the the black cover.
  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Kommentar hinzufügen

Locate the switches in the handle of the device.
  • Locate the switches in the handle of the device.

Kommentar hinzufügen

Set the multimeter to 200 ACV.
  • Set the multimeter to 200 ACV.

Kommentar hinzufügen

Bring the probes toward each switch to test for continuity.
  • Bring the probes toward each switch to test for continuity.

  • If the numbers on the multimeter continue to change, the circuit is closed and the switches are functioning.

  • If the meter stays at a finite number, the circuit is open and the switch needs to be replaced.

  • To replace faulty switch, cut the wires and solder the wires back on to the new switch.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Mitglied seit 18.09.2012

80 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 1-5, Propen Fall 2012 Mitglied von Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 11

Insgesamt: 808