Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Separate the shell from the main component.
-
Check to ensure each piece is free from debris.
-
-
-
-
Bring the probes toward each switch to test for continuity.
-
If the numbers on the multimeter continue to change, the circuit is closed and the switches are functioning.
-
If the meter stays at a finite number, the circuit is open and the switch needs to be replaced.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.