Zum Hauptinhalt wechseln

Replacing Nokia X3-02 LCD

Was du brauchst

  1. Replacing Nokia X3-02 LCD, LCD: Schritt 1, Bild 1 von 3 Replacing Nokia X3-02 LCD, LCD: Schritt 1, Bild 2 von 3 Replacing Nokia X3-02 LCD, LCD: Schritt 1, Bild 3 von 3
    • Before disassembling your phone, be sure it is powered off.

    • To remove the back cover press the two "buttons".

    • Remove the battery.

  2. Replacing Nokia X3-02 LCD: Schritt 2, Bild 1 von 2 Replacing Nokia X3-02 LCD: Schritt 2, Bild 2 von 2
    • Remove the three 3mm black screws on the top of the phone.

    • Remove the two 5mm screws.

    • Loosen these two screws at the bottom of the phone.

    • Probably these screws will not come out from their home, no matter. It is only important to unscrew them completely.

  3. Replacing Nokia X3-02 LCD: Schritt 3, Bild 1 von 3 Replacing Nokia X3-02 LCD: Schritt 3, Bild 2 von 3 Replacing Nokia X3-02 LCD: Schritt 3, Bild 3 von 3
    • With a plastic opening tool remove the little piece of plastic in the bottom of of the phone.

    • The two corners marked are VERY SLENDER, when removing the plastic be very careful. Otherwise you will break them.

    • To remove the logic board assembly push from the rear of the phone.

  4. Replacing Nokia X3-02 LCD: Schritt 4, Bild 1 von 2 Replacing Nokia X3-02 LCD: Schritt 4, Bild 2 von 2
    • Remove the keyboard with a plastic opening tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer:innen haben diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 4,780