Einleitung
This guide gives step-by-step instructions for replacing strings in the most appropriate manner, ensuring that you can do some seriously righteous jamming on your New Yorker!
Was du brauchst
-
-
Place the mandolin on a firm, level surface with adequate lighting.
-
-
-
Loosen the tuning nob.
-
Carefully remove the top end of string from the tuner in the mandolin head.
-
-
-
Unhook the old string from the tail of the mandolin.
-
Remove the string from the bottom.
-
-
-
Select a new string, and then insert the bottom end of it through the bridge at the tail.
-
-
-
-
Pulling the string taut, bring its top end across the nut and into the tuning peg.
-
-
-
Run the line through the tuning element at the head of the mandolin, as pictured. Be sure to pull the string away from the headstock.
-
-
-
Pull the string down, towards the fretboard, and run the string underneath itself.
-
Pull the string tight so that it wraps around the tuning peg.
-
-
-
Optional: Clip the electronic tuning device to the head of the mandolin; use the device to assist in fine-tuning your mandolin.
-
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.