Revlon One-Step Hair Dryer Setting Dial Replacement

Einleitung

If your hair dryer will not power on after multiple troubleshooting attempts, the setting dial may be defective. As a result, this guide will instruct users on how to properly replace the setting dial at the bottom of the hair dryer.

Was du brauchst

Schritt 1 Barrel

Revlon One-Step Hair Dryer Setting Dial Replacement, Barrel: Schritt 1, Bild 1 von 1

First, remove the pink panels on each side of the handle in order to access the screws.
Use the iFixit opening tool to remove the pink panels.

Bearbeiten

What is a fix it opening tool?

amg3232@yahoo.com - 3. Nov 2022 Antwort

Donde compro el barrel

Joan2apie - 11. Feb 2023 Antwort

You don't actually have to take these off. Why not just start on step 4 and 5, then do step 1? That way the top of the panel can be popped out to get the top screw, and the rest of the panel will come off without breaking the flaps

Val Ion - 30. Mär 2024 Antwort

Schritt 2

Revlon One-Step Hair Dryer Setting Dial Replacement: Schritt 2, Bild 3 von 3

After removing the pink panels, there will be one visible screw on each side of the dryer handle measuring at 11mm.
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
Next, completely remove the screws out of the dryer handle.

Bearbeiten

Schritt 3

Revlon One-Step Hair Dryer Setting Dial Replacement: Schritt 3, Bild 3 von 3

Remove the barrel by twisting and pulling it away from the handle of the dryer.
Before attempting to take the barrel off, make sure the dryer powered completely off and is cool to the touch.

Bearbeiten

I was only able to remove the brush after I used a flathead to pull the main black pieces on the handle away from the brush. These black pieces lock the brush into place.

Cecily Nolan - 5. Mär 2023 Antwort

Thank you, so helpful. I was about to just throw it away.

Saniyah Haines - 19. Jul 2023

Schritt 4 Cord and Plug

Revlon One-Step Hair Dryer Setting Dial Replacement, Cord and Plug: Schritt 4, Bild 1 von 2

Revlon One-Step Hair Dryer Setting Dial Replacement, Cord and Plug: Schritt 4, Bild 2 von 2

Next, slide down the air inlet and the setting dial to reveal the 11mm screws on each side of the handle at the bottom of the hair dryer.

Bearbeiten

I can't slide down the air inlet, it is fixed somehow. I can rotate it as much as the setting dial but no more. Any ideas?

Kai Birkmann - 27. Dez 2022 Antwort

it's the same for me.

Can we have a video please ?

man dark - 7. Jan 2023 Antwort

I used an adjustable plier to firmly grab the solid portion of the air inlet closer to the power cord, and twisted it counterclockwise until it clicked, then slide out

Betina Biolatto - 8. Jan 2023 Antwort

This does not "slide"

Arby - 31. Jul 2023 Antwort

Yes it does slide - I made a short video https://youtu.be/PyEq7-DLC08

Hasan Ali - 29. Aug 2023 Antwort

Schritt 5

There will be one visible screw on each side of the dryer at the bottom of the handle, measuring at 11mm.
Carefully unscrew both of these screws with a tri-point Y000 screwdriver.
Store screws in a safe place, you will need them to reassemble the device later.

Bearbeiten

Schritt 6

Place the iFixit opening tool along the seams of the handle and pry the two pieces apart.

Bearbeiten

Schritt 7

Revlon One-Step Hair Dryer Setting Dial Replacement: Schritt 7, Bild 3 von 3

Once you have exposed the inside of the dryer, you will see a clear port at the very end where the cord is connected and plugged into.
Now, with your thumb and pointer finger gently pinch the top and bottom of the clear port.
Next with your free hand carefully pull the cord out of the port of the dryer handle.