Einleitung
Ricoh Shotmaster 130Z Film Release Spring Replacement.
Was du brauchst
-
-
Push the switch that says "open" on the side of the camera.
-
-
-
-
Once the compartment is open and unscrew the two 0.5mm Phillips screws that hold the spring in place. Replace the spring with a new one.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 3-4, Isaacson Fall 2016 Mitglied von UMass Dartmouth, Team 3-4, Isaacson Fall 2016
UMASSD-ISAACSON-F16S3G4
3 Mitglieder
10 Anleitungen geschrieben
