Was du brauchst
-
-
Turn the keyboard upside down to access the screws
-
Remove 15 Philips PH2 screws
-
-
-
Turn the keyboard upright again and lift the top cover from the front
-
Remove 6 connectors
-
-
-
-
Remove the power output connector
-
Loosen the two flathead screws holding the mains wires to release them
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.