Einleitung
This guide is for the removal or installation of the rotary multi selector wheel.
Was du brauchst
-
-
Unscrew the two 3.5mm Phillips screws from the side with the AV outlet.
-
Unscrew the 3.5mm Phillips screw from the opposite side of the camera.
-
Unscrew the six 3.5mm Phillips screws from the bottom of the camera.
Frag FixBot
-
-
-
In diesem Schritt verwendetes Werkzeug:Tweezers$4.99
-
Place the plastic opening tool underneath the ribbon tab as shown. Gently lift the tab up.
-
Gently pull the ribbon from the logic board with tweezers.
-
With the ribbon disconnected, the back casing should now be detached from the rest of the camera.
-
-
In diesem Schritt verwendetes Werkzeug:Tweezers$4.99
-
Lift up the metal cover and its button slowly using the tweezers.
-
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 8-56, Johann Spring 2013 Mitglied von Cal Poly, Team 8-56, Johann Spring 2013
CPSU-JOHANN-S13S8G56
4 Mitglieder
18 Anleitungen geschrieben
