Einleitung
This guide will allow you to detach the faceplate in order to replace existing buttons or screen on your Sony Ericsson W890i
Was du brauchst
-
-
Flick the two lock tabs into the unlocked positions by pushing each button forward.
-
-
-
-
You can now access the phone's battery.
-
Using a spudger, remove the battery and set it aside.
-
-
-
Remove the two small rubber pieces that cover the lower screws.
-
Using a T-6 Torx wrench or screwdriver, remove all four of the small screws at the top and bottom corners on the back of the phones.
-
-
-
Gently pry off the faceplate using a plastic opening tool.
-
Insert the plastic opening tool into the middle of the front and back panels of the phone.
-
-
-
Separate the front and back panels that were pryed open with the plastic opening tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
SUNY Cortland, Team 1-3, Getto Spring 2013 Mitglied von SUNY Cortland, Team 1-3, Getto Spring 2013
SUNYCORT-GETTO-S13S1G3
3 Mitglieder
8 Anleitungen geschrieben
