Zum Hauptinhalt wechseln

Einleitung

Prereq-only guide to prepare the MiTM Air Compressors AM1PH6508HD 2012 for service.

  1. Before you begin, make sure the device is powered down and cool to the touch. Flip the engine switch into the OFF position.
    • Before you begin, make sure the device is powered down and cool to the touch.

    • Flip the engine switch into the OFF position.

  2. Grab the plastic housing at the end of the spark plug wire. Pull firmly to disconnect the wire from the spark plug.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  3. Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor. Ensure the tank is completely depressurized before starting repairs.
    • Pull the ring on the safety relief valve away from the compressor tank to drain the air from the compressor.

    • Ensure the tank is completely depressurized before starting repairs.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kyle Smith

Mitglied seit: 01.02.2021

30.446 Reputation

122 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

143 Mitglieder

16.765 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 2

Letzten 30 Tage: 5

Insgesamt: 23