Einleitung

Is your Blu-ray player not able to play your favorite flicks due to a faulty disc drive? If so, all you need is a #1 Phillips screwdriver and this guide to show how to replace the DVD disc tray with a new one.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
    • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

    • Tilt the back of the top cover forward to remove from chassis.

    Kommentar hinzufügen

  2. Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
    • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

    Kommentar hinzufügen

    • Remove the two ribbon cables from the Main Logic Board assembly by gently pulling up on the blue tab.

    • Be careful not to damage the ribbon cable by using too much force.

    Kommentar hinzufügen

    • Using a #1 Phillips head screwdriver, remove the two 7.5 mm screws (one not shown) near the front that secures the disc tray to the chassis.

    Kommentar hinzufügen

    • Push two small prongs on either side of disc tray inwards and push disc tray forward.

    Kommentar hinzufügen

    • Remove disc tray

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Louis McKean

Mitglied seit 18.10.2017

501 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team S1-G21, Cagle Fall 2017 Mitglied von USF Tampa, Team S1-G21, Cagle Fall 2017

USFT-CAGLE-F17S1G21

3 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 6

Insgesamt: 149