Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Use this guide to replace the back casing and to remove the back casing to access the interior of the phone.
Was du brauchst
-
-
Apply downward pressure to the top of the battery panel while pulling down to slide it off the phone.
-
-
-
Locate the grooves on the sides of the battery near the bottom of the phone. Use your fingers to pull the battery up and out of the phone.
-
-
-
-
Use the spudger to pry the two plastic caps out of the top corners of the phone casing.
-
-
-
Insert the plastic opening tool in the gap between the back panel and rest of the body.
-
Slide the tool along the edges until the two pieces come apart.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 20-1, Maness Winter 2013 Mitglied von Cal Poly, Team 20-1, Maness Winter 2013
CPSU-MANESS-W13S20G1
4 Mitglieder
12 Anleitungen geschrieben
