Zum Hauptinhalt wechseln

Einleitung

The camera assembly is susceptible to various environmental forces such as moisture, vibration, and shock. Replacing this part is easy.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Samsung Captivate Camera Assembly Replacement, Battery: Schritt 1, Bild 1 von 1
    • Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.

    • Lift up the back cover.

  2. Samsung Captivate Camera Assembly Replacement: Schritt 2, Bild 1 von 1
    • Place your finger on the bottom of the battery and lift to remove.

  3. Samsung Captivate Camera Assembly Replacement: Schritt 3, Bild 1 von 1
    • Replace the old battery with the new one.

  4. Samsung Captivate Camera Assembly Replacement, Rear Case: Schritt 4, Bild 1 von 1
    • Insert the spudger underneath the bottom section of the phone.

    • Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

  5. Samsung Captivate Camera Assembly Replacement: Schritt 5, Bild 1 von 1
    • Remove the six 4.5mm #000 Phillips screws.

  6. Samsung Captivate Camera Assembly Replacement: Schritt 6, Bild 1 von 3 Samsung Captivate Camera Assembly Replacement: Schritt 6, Bild 2 von 3 Samsung Captivate Camera Assembly Replacement: Schritt 6, Bild 3 von 3
    • Starting at a bottom corner, use the spudger to separate the rear case from the front display.

    • Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

    • Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

  7. Samsung Captivate Camera Assembly Replacement: Schritt 7, Bild 1 von 1
    • Separate the rear case from the phone.

  8. Samsung Captivate Camera Assembly Replacement, Camera Assembly: Schritt 8, Bild 1 von 1
    • Use the spudger tool to pry up the chip labeled "NEC." This releases the chip.

  9. Samsung Captivate Camera Assembly Replacement: Schritt 9, Bild 1 von 1
    • Gently lift the camera assembly out of the plastic housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Drew Bentz

Mitglied seit: 22.09.2011

565 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 20-25, Maness Fall 2011 Mitglied von Cal Poly, Team 20-25, Maness Fall 2011

CPSU-MANESS-F11S20G25

3 Mitglieder

9 Anleitungen geschrieben

2 Kommentare

Is this for the front facing camera

tracy mann - Antwort

No, this is for the rear facing camera. The Samsung Captivate does not have a front facing camera.

Will Budney -

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 10

Insgesamt: 2,248