Einleitung
This guide shows how to replace the back buttons panel of a Samsung DV180F when damaged. This procedure is very simple since the device is not entirely disassembled. It only involes loosening a few screws and unpluging the connecting ribbons.
Was du brauchst
-
-
Remove the two external screws from the camera using a Phillips 000 screwdriver.
-
-
-
Insert a plastic opening tool in the gap between the camera body and back panel.
-
Pry along the right side of the camera to separate the back panel.
-
-
-
-
Once the camera is open, remove the two internal screws using a Phillips 000 screwdriver.
-
-
-
Use a plastic opening tool to release the lock securing the ribbon receptor to the right side of the motherboard.
-
-
-
Gently lift the circuit board from the camera.
-
Remove the display ribbon receptor lock to remove back panel from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 14-4, Eyestone Fall 2016 Mitglied von USF Tampa, Team 14-4, Eyestone Fall 2016
USFT-EYESTONE-F16S14G4
4 Mitglieder
8 Anleitungen geschrieben
