Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
Turn the phone off and make sure your hands are clean. Use your thumb nail or a plastic spudger to pry open the back cover,
-
-
-
Use the plastic opening tool or your thumb nail to lift the battery out of the receptacle.
-
-
-
-
Remove the five 4 mm screws with a Phillips#00 screwdriver.
-
Make sure you remove the sticker hiding the screw on the left bottom corner.
-
-
-
Using the plastic opening tool pry into the bezel to remove the mid-frame
-
Continue moving the plastic opening tool around the mid-frame to separate it from the display assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
6 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 8-2, Leahy Fall 2014 Mitglied von USF Tampa, Team 8-2, Leahy Fall 2014
USFT-LEAHY-F14S8G2
4 Mitglieder
5 Anleitungen geschrieben
