Zum Hauptinhalt wechseln

Einleitung

This guide will show you the steps to removing and replacing the earpiece speaker inside the Samsung Galaxy Media Player 5 device.

  1. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: Schritt 1, Bild 1 von 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement, Earpiece Speaker: Schritt 1, Bild 2 von 2
    • Remove the SD Memory Card before working on the device.

    • Use a Phillips screwdriver to remove the 10 mm screw near the SD Memory Card port.

  2. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 2, Bild 1 von 1
    • White caps cover screws on both sides of the charging port. Use the angled tweezers to remove them.

    • Use a blow dryer on low heat if necessary to loosen the adhesive.

  3. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 3, Bild 1 von 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 3, Bild 2 von 2
    • Using a Phillips head screwdriver, unscrew the two 10 mm screws located on either side of the charging port.

  4. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 4, Bild 1 von 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 4, Bild 2 von 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 4, Bild 3 von 3
    • Using the opening pick, pry at the bottom and work around each edge of the device until the front cover and back cover housing is separated.

    • You will hear a popping sound to indicate the separation.

  5. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 5, Bild 1 von 2 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 5, Bild 2 von 2
    • Using the plastic opening tool, apply an upward force to detach the battery and the tab attached to it.

  6. Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 6, Bild 1 von 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 6, Bild 2 von 3 Samsung Galaxy Media Player 5 Earpiece Speaker Replacement: Schritt 6, Bild 3 von 3
    • Using the plastic opening tool, apply an upward force to detach the speaker earpiece.

    • Use the tweezers to attach the new earpiece speaker in place of the original.

    • Use a blow dryer, on low heat settings, to loosen the adhesive on the speaker earpiece.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

China Ayala

Mitglied seit: 05.03.2015

584 Reputation

4 Anleitungen geschrieben

Team

Sam Houston State, Team 11-7, Blackburne Winter 2015 Mitglied von Sam Houston State, Team 11-7, Blackburne Winter 2015

SHSU-BLACKBURNE-W15S11G7

3 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 342