Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

This guide will teach you how to replace a nonfunctional battery in your Samsung Galaxy Note 10.1 2014 edition.

    • Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.

    • If possible, consider using the black nylon spudger for a gentler separation.

    Remove stylus before you remove. There’s a nubbin on the main board that may dislodge it stylus is in place. it is easily reinserted, but easy hassle to avoid.

    Matt - Antwort

    It’s worth mentioning that there is a part of the device casing, accessible from the back, that can be removed but has very fragile retaining clips. Although the picture does show that the prying tool is lifting the screen, it is hard to see. You will not be able to access the charge port by removing a portion of the casing. You must remove the case from the screen side.

    Eden Mugg - Antwort

    Be careful!!!

    the first picture of this first step and the instructions are misleading. What you need to remove is the back cover of the tablet. Use the opening tool along the edges of the back cover, NOT on the screen as the picture and the instructions say.

    rene carmona - Antwort

  1. Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.
    • Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.

    • Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.

    I would recommend disconnecting the battery at this stage in the process, as the connector can be lifted without disconnecting the cables. It’s generally best practice to disconnect the battery before disconnecting any other cables.

    Eden Mugg - Antwort

  2. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Remove the six 3mm screws around the battery with the Phillips PH000 screwdriver.

    This step seems unnecessary, as the battery connector can be disconnected without lifting the battery. If you struggle to lift the connector, you could follow this step to get better leverage.

    Eden Mugg - Antwort

    • Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.

    • Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

15 weitere Nutzer haben diese Anleitung absolviert.

Joseph Rasico

Mitglied seit: 20.02.2017

1.722 Reputation

6 Anleitungen geschrieben

Team

USF Tampa, Team S1-G6, Leahy Spring 2017 Mitglied von USF Tampa, Team S1-G6, Leahy Spring 2017

USFT-LEAHY-S17S1G6

3 Mitglieder

6 Anleitungen geschrieben

Step 1 you have to show the back cover to remove. Showing the front side is confusing.

After step 4 there should be a step 5 to show how to disconnect the white connector with the colored wires: it took time to discover that you have to lift the 2 side clips, and not to pull…

prisca - Antwort

Just followed your instructions. Used a online kit with a guitar pick-like spudger. Had to wrestle with it slightly, but everything worked out perfectly to your instructions.

Matt - Antwort

Followed the instructions. Worked nearly perfectly. The last step is a bit tricky. Just look at the new battery to understand the system.

Eramur - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 8

Letzten 7 Tage: 57

Letzten 30 Tage: 314

Insgesamt: 13,757