Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einführungsvideo

  1. Heat the back cover to melt the strong adhesive sticker underneath.
    • Heat the back cover to melt the strong adhesive sticker underneath.

  2. Try to pull and open a gap between back cover and  frame after heat. Insert into a guitar pick to cut the sticker.
    • Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick to cut the sticker.

    Is it possible to pull it without breaking it?? :/

    Mohammad - Antwort

  3. If you do it hardly, you need much more heat especially the edged side.
    • If you do it hardly, you need much more heat especially the edged side.

    • Slipping a playing card through the gap is a good way to loosen up the adhesive.

  4. Remove the back cover. The white stripe is the sticker.
    • Remove the back cover. The white stripe is the sticker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

44 weitere Nutzer haben diese Anleitung absolviert.

Sophia

Mitglied seit: 25.03.2014

43.114 Reputation

62 Anleitungen geschrieben

What about putting the one back on?

rcf917 - Antwort

will it go back on and stay on without new adhesive?

dfasdfjiun - Antwort

I suggest that you take new adhesive, old adhesive is not strong enough to hold back cover.

Witrigs -

You can check this video of put it back battery cover : https://www.youtube.com/watch?v=3HrmeVGY...

Witrigs - Antwort

How do I remove the sticky part

Marcelino Lopez - Antwort

How to put the cover back will there be a sticker in battery cover. And from where I will get to buy that

BIJLI R - Antwort

Where do you find the replacement back for sale? I looked on the Samsung site, and no luck.

Marty Meyer - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 2

Letzten 7 Tage: 30

Letzten 30 Tage: 144

Insgesamt: 105,746