Einleitung
By following this guide you should be able to replace the headphone jack in 10-20 minutes. By replacing the headphone jack, you will fix any headphone related audio issues such as static, muffled sounds, or poor earphone audio quality.
Was du brauchst
-
-
Using your hands, carefully remove the back panel by popping the open slit, near the headphone jack, outwards.
-
-
-
Using your fingernail or nylon spudger, remove the battery by lifting upward in the recess of the bottom right corner.
-
-
-
-
Using the nylon spudger, carefully unhinge and pry the secondary rear panel using the recessed tabs on the left and right sides.
-
-
-
Using the spudger lift the speaker assembly upward, so you may have access to the headphone assembly.
-
-
-
Using the spudger, carefully unplug and remove the headphone port assembly by lifting upward on the ribbon cable.
-
The headphone jack should lift off of the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
USF Tampa, Team 17-6, Blackwell Fall 2016 Mitglied von USF Tampa, Team 17-6, Blackwell Fall 2016
USFT-BLACKWELL-F16S17G6
3 Mitglieder
5 Anleitungen geschrieben
