Einleitung

Verwende diese Anleitung, um die Kopfhörerbuchseneinheit samt Statusleuchte und Infrarot Sensor in deinem Samsung Galaxy S4 zu ersetzen.

Heble mit einem Plastic Opening Tool, oder deinem Fingernagel, in die Kerbe links von den Rückkamera, bei dem Power Button.
  • Heble mit einem Plastic Opening Tool, oder deinem Fingernagel, in die Kerbe links von den Rückkamera, bei dem Power Button.

I snapped the back cover sorry m8

Daniel Anishchenko - Antwort

I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above pic and found the divot and was able to take off the rear cover as per the “Step 1 rear cover” instructions.

Terry Crawford, Jr. - Antwort

Hebe das hintere Gehäuse an der Ecke, die der Kerbe am nächsten ist, an und entferne es von dem Gerät.
  • Hebe das hintere Gehäuse an der Ecke, die der Kerbe am nächsten ist, an und entferne es von dem Gerät.

Where is the divot? Please let me know that

James - Antwort

I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above Step 1 rear cover pic and found the divot and was able to take off the rear cover as per the “Step 2 “ instructions.

Terry Crawford, Jr. - Antwort

  • Führe ein Plastic Opening Tool, oder deine Finger, in die Kerbe am Akkufach und hebe den Akku nach oben.

  • Entferne den Akku von deinem Samsung Phone.

it worked for me

John Donovan - Antwort

I was able to remove the Samsung Battery with the blue plastic opening tool(AKA: Spudger) as per the Step 4 Battery instructions.

Terry Crawford, Jr. - Antwort

  • Drücke die SIM Karte mit einem Plastic Opening Tool oder dem Fingernagel etwas tiefer in ihren Slot, bis du ein Klick hörst.

  • Lasse die Karte nach dem Klicken los. Daraufhin ploppt sie aus dem Slot.

  • Entferne die SIM Karte.

  • Beim Wiederzusammenbau drücke die SIM Karte in den Slot, bis sie wieder einrastet.

Looks easy but doesn't work. No one has a plastic opening tool. Using fingernail, you can press SIM card into slot but it does not pop out so you can remove it.

Laurie McWherter - Antwort

I agree with the comment above

I also don't have a plastic tool and my finger nail won't pop the card out.

Grethe Montano. September 22

Grethe Montano - Antwort

I was able to remove the SIM Card with the blue plastic opening tool(AKA: Spudger) with no problems as per the Step 5 SIM Card instructions.

Terry Crawford, Jr. - Antwort

Hello, how can I change the sim card slot itself? I think I damaged it.

daejung - Antwort

same issue as above, appears bent upward and will not click down in

Jer S - Antwort

  • Entferne die neun 4,0 Kreuzschlitzschrauben, mit denen der Mittelrahmen an der Display Einheit befestigt ist.

How much it will cost to replace a midframe

kannan - Antwort

How much cost will be on replace a midframe

Hiren pedhadiya -

I'm seeing midframes available on Ebay for around $10.

Alex - Antwort

I purchased a 1.5x40mm Phillips screw driver and was able to remove all 9 40mm screws from the midframe as per the Step 6 Midframe instructions.

Terry Crawford, Jr. - Antwort

  • Der Mittelrahmen ist mit mehreren Kunststoff-Clips hinter der Chromeinfassung des Mittelrahmens an der Display Einheit befestigt.

  • Starte auf der Seite, wo sich der Lautsprecherregler befindet. Führe dein Plastic Opening Tool zwischen die Chromeinfassung um das Displayglas und das größere Chromrandteil.

  • Fahre mit dem Opening Tool an der Spalte entlang und trenne dabei die Kunststoff-Clips.

  • Sei sei vorsichtig beim Hebeln und heble gerade stark genug, um die Kunststoff-Clips zu trennen—in der Einfassung des Mittelrahmens gibt es einige dünne Punkte, die brechen können, wenn du sie zu stark biegst.

I used same tool as in the photo and i broke the display. I think you should use a very thin plastic tool, such as a credit card but even more thin and flexible.

nicosoranno4gxo - Antwort

I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9.

Terry Crawford, Jr. - Antwort

This blue Case Opening tool has a less rigid edge that is kinder to trim than the hard black Spudger shown in later steps. I was glad to have the right tool on hand at this step. Use it as a wedge and slide it along the gap.

Tom Huber - Antwort

  • Heble weiter um die Ecke des Mobiltelefons herum.

  • Fahre mit deinem Opening Tool an der Spalte zwischen dem Mittelrahmen und dem Display entlang des unteren Teil des Gerätes und löse dabei die dortigen Kunststoff-Clips.

I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9.

Terry Crawford, Jr. - Antwort

  • Heble weiter um die Ecke herum in Richtung der Power Button Seite.

  • Fahre mit dem Opening Tool an der Spalte entlang.

Kommentar hinzufügen

  • Fahre mit dem Plastic Opening Tool entlang der Oberseite des Mobiltelefons und löse die letzten Clips. So lässt sich der Mittelrahmen von der Display Einheit lösen.

  • Nun kannst du mit deinem Plastic Opening Tool noch einmal um das Gerät herumfahren, um sicherzugehen, dass alle Kunststoff-Clips gelöst sind.

On my phone, there was another clip holding the white midframe to the battery compartment, in the middle of the top edge of the battery compartment, near the battery contacts. If you don't release that before removing the midframe, it is easy to break.

josephoswald - Antwort

I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9. In Step 10 just make sure all the plastic clips are separated from the midframe and the display assembly so you can pull them apart 100% without breaking them.

Terry Crawford, Jr. - Antwort

  • Entferne den Mittelrahmen von der Display Einheit.

here i leave them a video i made doing the work

https://www.youtube.com/watch?v=85pOvI6O...

enjoy

Gabriel Barrandeguy - Antwort

Just to be sure does the rear frame referred by etradesupply is the same as the middle frame? I' planning to refurbish the side panel because of the dents and scratches but I just want to make sure I'm buying the right thing. The etradesupply referring the housing as rear and front housing so Im not sure which one correspond to the middle frame. Below is the link to the website http://www.etradesupply.com/oem-samsung-...

Mohd Bahij Ahmad - Antwort

My Sprint S4 was slightly different then the one pictured above but I just completed this repair in under 10 minutes.. It would have been slightly quicker but fooling around with those little screws can be irritating if you have big hands.

Michael Willis - Antwort

Just did this on my S4. Instructions were extremely helpful, but I had to remove a screw (step 10.5?) to remove the upper display assembly bracket. Other than that, flawless! Thanks!

JackieME - Antwort

The 3rd image of the 11th step shows that when the midframe is removed, some parts come along with it (at the bottom part of it). What are these parts? should they be removed too and placed in the new midframe? Are they easy to remove?

Chris - Antwort

I purchased a blue plastic opening tool(AKA: Spudger) and was able to remove the midframe from the display assembly as per the Step 7. I had to hold the cell phone firmly in my left hand while I gently forced the spudger between the chrome bezel and the midframe with my right hand and heard plastics clips separate and saw the midframe start to separate from the display assembly. Don’t be afraid to get that spudger in and just gently go down the side of the phone and you will hear the plastics clips detach and the midframe to separate more and more until you are able to separate them 100%. I started at the volume button side of the phone in Step 7 and ended at the power button side in Step 9. In Step 10 just make sure all the plastic clips are separated from the midframe and the display assembly so you can pull them apart 100% without breaking them. In Step 11 is just the separating the midframe from the display assembly 100%. So far these instructions have been 100% correct for a Samsung Galaxy S4.

Terry Crawford, Jr. - Antwort

  • Trenne den Stecker der USB Platine mit dem flachen Ende eines Spudgers.

  • Trenne den Kabelstecker der Frontkamera.

  • Trenne den Kabelstecker der Ohrhörer-/ Lautsprecher Einheit.

Does it matter which motherboard I get? Why are there different prices depending on the phone company?

Zoe Carpenter - Antwort

  • Trenne den Kabelstecker der Kopfhörerbuchse.

  • Trenne den Kabelstecker des Displays/Digitizers.

  • Trenne den Kabelstecker der Antenne.

Replacing the S4 advance display, I've broken the plug on motherboard of the antenna, which part should I replace now ?

Second question, when display replaced, the "home" buttton was working just as the "return", did I make a wrong thing ? (perhaps ending the daughterboard) and what is the countermeasure ?

LEMEUR JMarc - Antwort

My model had an antenna connection next to the usb board connector in addition to the antenna connection near the display cable connector.

Drew - Antwort

That's point a, on the daughter board (where the USB is located is point b. You must connect it from a to b

djweijers1997 -

Same as Drew. My model has two antenna connections. One as shown, and one on the left side of the motherboard.

Gavin McMorrow - Antwort

Mine does too. I can't get that one to reconnect. What is it?

seeshelle -

I could not get the screen connector to fit on with the motherboard assembly in place. I had to remove the motherboard assembly, attach the screen connector, and then carefully replace the motherboard assembly, with the screen connector still attached..

Tom4G - Antwort

Same as Tom4G above. When trying to connect the screen connector, it would not give me that nice clear snap indicating a positive connection. The phone powered up with no screen. So, I disconnected the other connectors again, lifted the motherboard out and connected the screen connector by pinching it with finger and thumb from both sides of the motherboard, this time getting a nice snap when it engaged.

speedrzr -

  • Entferne die einzelne 2,4 mm Kreuzschlitzschraube von der Motherboard Einheit.

As Sam Lionheart states at the end of this guide, some of these phones have an additional antenna on the opposite side of the phone. Be sure to detach it before removing the motherboard.

mcr4u2 - Antwort

  • Entferne vorsichtig das Motherboard.

  • Halte das Motherboard an seinen Kanten, um Schäden durch elektrostatische Entladung zu vermeiden. Achte darauf, dass es nicht an Kabeln hängenbleibt, wenn du es aus der Display Einheit entfernst.

Kommentar hinzufügen

  • Entferne die einzelnen 2,4 Kreuzschlitzschrauben, welche die Kopfhörerbuchseneinheit am Display befestigen.

My assembly had a silver conductive tape shield over the array of components shown in the middle of this photo. I peeled the old one off and attached it in the same location on my new digitizer.

David - Antwort

  • Entferne die Kopfhörerbuchseneinheit.

The headphone jack is surrounded by rubber. It's kind of squeezed in there. You can pry on it to get it out.

jonathan - Antwort

I had a quick question there's a little white rubber circular gasket piece that the headphone jack covers up

What's that piece called?

damian lasher - Antwort

The small rectangular milky-white silicon gasket appears to be a diffuser for ambient light sensor.  I removed it with a small screwdriver, and replaced it in the same location in my new screen assembly.

Nicholas Crisp -

The small rectangular milky-white silicon gasket appears to be a diffuser for an ambient light sensor.  I prised it out of the old assembly and placed it in the new screen assembly.  I also started transferring the components as they were removed from the old screen, so the head-phone jack went straight into the new at this point.  I may regret that later…

Nicholas Crisp -

The angle of the picture here makes it appear like the head phone jack needs to be slid out of the top of the phone. This is impossible due to small bits of plastic holding it in at the top. If you're having trouble, the headphone jack is in fact supposed to lift straight up out of the phone.

sigoshi - Antwort

Additionally, there might be a small amount of adhesive holding the headphone jack to the board (there was some in my device). Apply a bit of heat to loosen it up, if needed.

Mikolaj Banasik - Antwort

it is easy to pop off, if you apply pressure to the right point. Using a plastic pair of tweezers or a pry tool, push at the lower right corner and gradually increase the pressure, if you apply enough pressure it will just pop right off.

Wissmiller Services - Antwort

Abschluss

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

36 weitere Nutzer haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:

100%

Nina Steinhaeuser hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Beginne zu übersetzen ›

Sam Lionheart

Mitglied seit 18.10.2012

337.037 Reputation

535 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

111 Mitglieder

6.679 Anleitungen geschrieben

I accidentally inserted an electric pin instead of the auxiliary jack into the head phone jack assembly. There was a loud screeching sound and ever since then the head phones do not work. However, I can play music through the phone speaker and also with Bluetooth. I cannot listen to music with my ear buds or head phones or with auxiliary speakers. I have replaced the jack assembly with a new one and yet it is the same. What more can I do to rectify this?

Guy Paranavitana - Antwort

Did you ever get help on this? Having the same problem.

Jace Blackburn -

Me too have same problem....did u got it fixed or not?...if yes how u did it...?

reone -

I too am having this issue. I assume we have fried the amp for external audio with wtv current we happened to let touch our aux ports. Sounds like I bigger issue to fix. Just still wondering if I can.

Zadboy Tanaka -

Where do you even get the part?

Albert Einstein -

Hi all,

I own a Galaxy s4 SGH-I337, No sound comes out of the right earbud with wire.

Bluetooth works fine in stereo.

I suspect the haedphone Jack plug to be broken, i order a new one on ebay now for 5$, i'll let you know when i've tried this repair.

Ewouik - Antwort

I own a Galaxy S4 SGH-I337 whose headphone jack does not work for the right ear.

However bluetooth works well in stereo, thus i suspect the jack module.

I am buying a new jack on ebay for 5 $ and will let you know when i receive it and install it.

... to be continued...

Ewouik - Antwort

Thanks to Sam Lionheart for this guide. It was clear and easy to follow. It gave me the instructions I needed to solve my problem - headphones etc. were no longer making good connections with my Galaxy S-4 jack - and for about $7 I was able to completely fix the issue.

Steve Heimann - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 8

Letzte 7 Tage: 36

Letzte 30 Tage: 138

Insgesamt: 43,897