Zum Hauptinhalt wechseln

Samsung Galaxy S6 Active Displayeinheit austauschen

Was du brauchst

  1. Samsung Galaxy S6 Active Displayeinheit austauschen, SIM Karte: Schritt 1, Bild 1 von 2 Samsung Galaxy S6 Active Displayeinheit austauschen, SIM Karte: Schritt 1, Bild 2 von 2
    • Setze deinen Fingernagel oder ein Plastiköffnungswekzeug in die Raste an der Seite des SIM Einschubs.

    • Heble den Einschub heraus aus seiner Fassung.

  2. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 2, Bild 1 von 1
    • Entferne den SIM Einschub mit der SIM Karte vom Smartphone.

  3. Samsung Galaxy S6 Active Displayeinheit austauschen, Displayeinheit: Schritt 3, Bild 1 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen, Displayeinheit: Schritt 3, Bild 2 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen, Displayeinheit: Schritt 3, Bild 3 von 3
    • Erhitze die Frontscheibe am Rand des Smartphones mit einem iOpener, einem Haartrockner oder einem Heißluftgebläse für 60 Sekunden um die Klebeverbindung am Rand der Scheibe aufzuweichen.

    • Den iOpener musst du dreißig Sekunden lang in der Mikrowelle erwärmen.

    Heat the phone in the microwave??? I really hope you meant to say heat the iopener tool in the microwave.

    rusty bongwater - Antwort

  4. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 4, Bild 1 von 1
    • Bringe einen Saugheber in der unteren Hälfte der Scheibe an.

  5. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 5, Bild 1 von 2 Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 5, Bild 2 von 2
    • Ziehe mit Hilfe des Saughebers vorsichtig an der unteren Hälfte der Scheibe.

    • Wenn du zu stark ziehst, kann die Scheibe kaputt gehen. Wenn du zu starken Widerstand spürst, musst du den vorigen Schritt wiederholen. Lasse dabei den iOpener etwas länger aufliegen.

    Pulling too* hard :)

    seth15599 - Antwort

  6. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 6, Bild 1 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 6, Bild 2 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 6, Bild 3 von 3
    • Wenn der Spalt, den du geöffnet hast, groß genug ist, dann setze ein Plastiköffnungswerkzeug unten ein, zwischen Glas und Rahmen des Smartphones.

    • Schiebe das Plastiköffnungswerkzeug rings um die Scheibe herum und hebele so das Display vorsichtig vom Rest des Smartphones weg.

    My phone had a substantial amount of adhesive between the copper area on the back of the display assembly (see pic in step 10) and the frame (see pic in step 13). There was no way to have known that as I started to remove the glass, but this made it difficult to lift the glass up and eventually led to the glass cracking as I tried to work the plastic opening tool up along the side of the phone (about in the spot shown in the second picture of this step). In hindsight, I think it would have been extremely difficult to remove the front glass undamaged without first starting to separatie that adhesive from the frame, but I’m not sure what would have been the best way to do that. My guess is I would have needed to slide a tool with a thinner/sharper edge upward from the bottom while pulling on the suction cup to start separating the back of the display assembly from the frame, and worked on both that and the edges of the glass at the same time.

    Rob Asher - Antwort

  7. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 7, Bild 1 von 1
    • Ziehe an der unteren Hälfte der Scheibe mit dem Saugheber und drücke gleichzeitig den Rahmen nach unten, um so die beiden Teile zu trennen.

    • Hebe nur die untere Hälfte an. Die Scheibe ist mit einer Klammer oben an der Hauptplatine befestigt und kann ausreißen, wenn du zu stark ziehst.

  8. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 8, Bild 1 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 8, Bild 2 von 3 Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 8, Bild 3 von 3
    • Wenn die Glasscheibe geöffnet ist, kannst du eine kleine Klammer sehen, welche die Verbindung des Bildschirms zur Hauptplatine oben am Smartphone bedeckt. Fasse die Klammer am Knick an der Seite an und ziehe sie heraus.

  9. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 9, Bild 1 von 1
    • Löse die Verbindung zum Bildschirm mit dem Plastiköffnungswerkzeug.

    If possible, disconnect the battery BEFORE you undo the screen connector. The battery flex is on the left, just under the LCD cable assembly.

    Jeana Morales - Antwort

  10. Samsung Galaxy S6 Active Displayeinheit austauschen: Schritt 10, Bild 1 von 1
    • Entferne die Displayeinheit aus LCD und Digitizer.

    All that copper/tin foil, whatever it is, stayed glued to the case and tore off the screen. I hope it isn’t important. What is it for anyways?

    Reed Deemer - Antwort

    Good Question. Mine ripped a little bit 2.

    floris brocaar -

    Probably heat displacement, you’ll find them on the back of most Samsung OEM LCD assemblies & high quality replacements. It’s probably not a big deal if you tear it, after all where’s the heat supposed to go from there? Pat yourself on the back for getting the LCD & glass up in one piece, don’t be surprised if nobody else shares your enthusiasm.

    NxG Walpole - Antwort

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Lucia Valbuena

Mitglied seit: 02/15/17

2.412 Reputation

8 Anleitungen geschrieben

Team

USF Tampa, Team 1-5, Sullivan Spring 2017 Mitglied von USF Tampa, Team 1-5, Sullivan Spring 2017

USFT-SULLIVAN-S17S1G5

3 Mitglieder

25 Anleitungen geschrieben

6 Kommentare

Great guide but I don't think its difficult, one of the easier repairs out there.

johnwkrebs - Antwort

Okay, well, the hairdryer didn’t work. Or maybe that suction cup might help lift a screen that *isn’t* shattered…?

Ah, well. At least the guide was free and the screen kit was cheap; now it’s all just trash.

skyblueandblack - Antwort

Suction cup does not work on a cracked screen. You will loose vacuum via the gaps in the cracks. Also be patient with the hair dryer. You must not rush that process. The idea is to heat the edge of the glass so that the glue strip under will melt or get soft enough to pull lose. Not to hot and not to cold. To hot and you damage the phone. To cold and the glue wont melt. It must be hot enough to touch with your finger for a few seconds before burning you. Then keep heating all the way around as you work IF you are working slow. The glue will harden if it cools done. I broke many screens before the process clicked in my mind. Now I realise how easy it was altogether.

Good luck

Brian Smith -

So we got it apart, which wasnt hard, just a pain! But yeah in the directions it says to put back together just reverse disrecyions. Umm yeah thats NOT working, i can NOT get the %#*@ screen connector reconnected. I've been trying for the 2 hours and it's not working! How am I suppose to line it up? And is it suppose to just clip together? What am I missing??? Please help!

Christina Ricciardi - Antwort

How do you reseal the screen? Do new screens come with glue to reattach the screens with?

Hyrum Tripp - Antwort

Hi, Good Job! It will make it fully complete if you discuss the sealing of the screen. I purchased this phone because of its ruggedness and resistance to water and dust. By opening up the phone I removed those important properties that served me fine for the last 5 years. I found out that you can buy pre-cut double-sided tape. How good? How easy? I will find out soon. Thanks for sharing.

Luis C - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 21

Insgesamt: 7,086