Einleitung
If the touch screen / digitizer / glass or the LCD display is broken, this manual will show you, how to disassemble the phone and replace the Display Assembly without frame.
[text|align=center]
_______________________________________ Video tutorial _______________________________________
Was du brauchst
Einführungsvideo
-
-
LCD Display + Touch screen (Display Assemblay) for Samsung Galaxy S III mini / i8190.
-
Switch off the phone, remove the battery and any SIM and memory card.
-
-
-
Remove 10x Phillips screws.
-
With a plastic tool remove the Middle frame.
Screw size is PH00, and they're all the same size, so don't worry about getting any of them mixed up! :)
-
-
-
Disconnect:
-
Menu buttons flex cable
-
Micro SD Card reader flex cable
-
Lift up slightly the mother board from the right edge.
-
Now disconnect the LCD Display flex cable which is located on the underside of the board.
-
-
-
Front camera
-
Main / Rear camera
-
Earpiece
-
Loudspeaker
-
Vibro motor
-
Micro SD Card reader
-
-
-
-
Warm the touchscreen to make adhesive tape soft. You can use a hair dryer.
-
Use the front camera hole to separate the glass at the corner.
-
Continue with separation with plastic tools, from up to down.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
18 weitere Nutzer:innen haben diese Anleitung absolviert.
2 Kommentare
Followed the VDO exactly and managed to fix the screen. Getting the right glue for the screen delivered took the longest time.
Worked perfectly, used regular glue I had at home and it worked just fine. Thanks!!