Zum Hauptinhalt wechseln

Diese Übersetzung enthält möglicherweise noch nicht die neuesten Änderungen der Original-Anleitung. Hilf mit, die Übersetzung zu aktualisieren oder sieh dir die Original-Anleitung an.

Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen

Was du brauchst

  1. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Öffnen: Schritt 1, Bild 1 von 2 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Öffnen: Schritt 1, Bild 2 von 2
    • Trenne den Bildschirm vom Rückteil indem du ein größeres Plastiköffnungswerkzeug zwischen sie setzt und aufhebelst.

    Separating the back cover was the hardest part of the procedure for me (a retired electrical/software engineer). I used a large flat screwdriver blade instead of the hard plastic tool shown. Go slow all the way around the tablet and expect pops as the pieces separate. I was not able to re-connect the back cover completely, accepting a paper-thin gap about 30% around the cover, but it is secure.

    Rick Nungester - Antwort

  2. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Rückteil entfernen: Schritt 2, Bild 1 von 2 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Rückteil entfernen: Schritt 2, Bild 2 von 2
    • Wenn der Bildschirm gelöst ist solltest du die Teile mit der Hand trennen können.

    Peter how do I know which charging port I need thank you I don't know how else to reach you Tom Patrick mlc@earthlink.net all small case and no spaces thank you

    Tom Patrick - Antwort

    Yikes. I began carefully prizing off the screen - but when it finally came away the connector (near the top of the screen, about 1” from the right side) got ripped, so the unit is damaged beyond repair. I think it would have been helpful if your guide had warned us about this possibility and given some advice about how to make sure it doesn’t happen. I now have a broken tablet and a brand new battery, likewise of no use to me. Pretty heartbroken - the unit had been working fine, mainstay of daily use.

    goodone - Antwort

    For any future people repairing their tablets. DO NOT REMOVE THE SCREEN. I thought my tablet was a Tab 2, but no it was a Tab 3. No heat guns needed. I ended up cracking my screen a bit. I don’t know the extent of the damage yet, but Im probably going to get a replacement screen. You need to pop out the whole thing. Not just the front screen. The reason being that there’s a sort of metal scaffolding holding the screen and the back together. This needs to be separated to put in the new charging port.

    Matt -

  3. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Akku abklemmen: Schritt 3, Bild 1 von 2 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Akku abklemmen: Schritt 3, Bild 2 von 2
    • Um den Akku zu entfernen musst du zunächst z.B. mit einer Pinzette den Anschluss lösen.

    • Der Verbinder muss nach oben gezogen werden.

  4. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Akku entfernen: Schritt 4, Bild 1 von 1
    • Wenn der Anschluss gelöst ist kannst du den Akku mit den Händen herausziehen. Es kann etwas schwer gehen, weil der Akku auf der Rückseite verklebt ist.

    You don't have to, just be careful with battery connector.

    Kyoko Hori - Antwort

    You have to be very careful with the battery connector. On mine, the plug was difficult to remove from the base and I ended up breaking the connections between the base and the circuit board. Maybe use the pry tool to hold the base down while easing out the plug.

    Hugh Morrison - Antwort

    I just did the same thing Hugh...does that mean my tablet is trashed? Can it be repaired?

    tlibert -

    There’s also a pull tab on with label printed on the batery to make the pulling easier.

    IMI Comp - Antwort

  5. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abklemmen: Schritt 5, Bild 1 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abklemmen: Schritt 5, Bild 2 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abklemmen: Schritt 5, Bild 3 von 3
    • Löse die Verbinder auf der Hauptplatine.

  6. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abschrauben: Schritt 6, Bild 1 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abschrauben: Schritt 6, Bild 2 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Lautsprecher abschrauben: Schritt 6, Bild 3 von 3
    • Die Lautsprecher sind mit 2,9 mm Kreuzschlitzschrauben #000 befestigt. Drehe sie heraus und hebe die Lautsprecher aus dem Gerät.

  7. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Verbinder lösen: Schritt 7, Bild 1 von 2 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Verbinder lösen: Schritt 7, Bild 2 von 2
    • Löse mit einem Plastiköffnungswekzeug vorsichtig alle Verbinder auf der Platine.

  8. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Hauptplatine abschrauben: Schritt 8, Bild 1 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Hauptplatine abschrauben: Schritt 8, Bild 2 von 3 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Hauptplatine abschrauben: Schritt 8, Bild 3 von 3
    • Entferne die 2,9 mm Kreuzschlitzschraube # 000 über dem Akku und die drei 2,9 mm Kreuzschlitzschrauben #000 rechts vom Akku.

  9. Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Platine entfernen: Schritt 9, Bild 1 von 2 Samsung Galaxy Tab 3 8.0 Hauptplatine austauschen, Platine entfernen: Schritt 9, Bild 2 von 2
    • Hebe vorsichtig die Platine aus dem Gerät..

    remove camera mentioned in step 7 before doing this

    as well as disconnecting the 3 connectors at the bottom n vm

    also note that the top left black square comes out with the motherboard

    Kerri - Antwort

Abschluss

Um dein Gerät wieder zusammen zu setzen folge den Schritten in umgekehrter Reihenfolge.

12 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

80%

VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Kyle Ballard

Mitglied seit: 09/22/14

939 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team 4-2, Brown Fall 2014 Mitglied von USF Tampa, Team 4-2, Brown Fall 2014

USFT-BROWN-F14S4G2

3 Mitglieder

26 Anleitungen geschrieben

2 Kommentare

Be sure to include screw lengths to the nearest mm on all repair guides.

Dan Brown - Antwort

You don’t need to remove the battery in order to remove the motherboard. Just disconnect the battery!

matt greece - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 14

Insgesamt: 11,027