Einleitung
This guide will take you through the step-by-step process of removing and replacing the motherboard of a Samsung Galaxy Tab 3 8.0.
Was du brauchst
-
-
Start out by separating the screen from the back cover using the larger plastic opening tool to pry them apart.
-
-
-
Once every part of the screen is separated from the back cover, you should be able to fully remove it with your hands.
-
-
-
To remove the battery you must use something small, such as tweezers, to disconnect the battery from its port.
-
-
-
-
After the battery is disconnected, use the pulling tab to safely remove the battery.
-
-
-
Unscrew the 2.9mm screws from the speakers using a Phillips head #000 screwdriver, then lift the speakers from the device.
-
-
-
Using a plastic remover tool, carefully unseat each of the electric leads plugged into the board.
-
-
-
Unscrew the 2.9mm Phillips #000 screw above the battery, and the three 2.9mm Phillips #000 screws to the right of the battery.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
12 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 4-2, Brown Fall 2014 Mitglied von USF Tampa, Team 4-2, Brown Fall 2014
USFT-BROWN-F14S4G2
3 Mitglieder
26 Anleitungen geschrieben
2 Kommentare
You don’t need to remove the battery in order to remove the motherboard. Just disconnect the battery!
