Zum Hauptinhalt wechseln

Samsung Galaxy Tab A 9.7 Rear Camera Replacement

Was du brauchst

  1. Samsung Galaxy Tab A 9.7 Rear Camera Replacement, Rear Camera: Schritt 1, Bild 1 von 1
    • Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.

  2. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 2, Bild 1 von 1
    • Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.

  3. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 3, Bild 1 von 1
    • Remove one of the iFixit opening tools and begin to go around the device with the other one until the back cover pops off.

  4. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 4, Bild 1 von 2 Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 4, Bild 2 von 2
    • Remove five 2.8 mm screws using the Phillips #000 screwdriver.

  5. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 5, Bild 1 von 2 Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 5, Bild 2 von 2
    • Disconnect all wires and strips that connect the motherboard to any other part of the device with an iFixit opening tool.

    • Lift up gently on all wires and strips.

  6. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 6, Bild 1 von 1
    • Lift the motherboard out of the back panel using an iFixit opening tool.

    • Be gentle when wiggling the motherboard out from underneath the battery's protective edge.

  7. Samsung Galaxy Tab A 9.7 Rear Camera Replacement: Schritt 7, Bild 1 von 1
    • Pull off the rear camera on the back of the motherboard and replace.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

IUPUI, Team S1-G3, Hovde Spring 2019 Mitglied von IUPUI, Team S1-G3, Hovde Spring 2019

IUPUI-HOVDE-S19S1G3

3 Mitglieder

3 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 246