Zum Hauptinhalt wechseln

Einleitung

This guide will give step by step instructions on how to replace the battery and motherboard.

  1. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off. Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off.
    • Remove the wrist strap by peeling back the rubber starting from one corner of the watch face. Continue peeling the rubber away from the watch face until the strap is completely off.

  2. Starting from an edge, wedge a metal spudger in between the screen and the chrome trim ring and pry, lifting the screen outwards. Some force is needed due to adhesive seal.
    • Starting from an edge, wedge a metal spudger in between the screen and the chrome trim ring and pry, lifting the screen outwards.

    • Some force is needed due to adhesive seal.

  3. Use a plastic opening tool to  gently pry upwards on the plastic motherboard assembly.
    • Use a plastic opening tool to gently pry upwards on the plastic motherboard assembly.

  4. Locate the ribbon assembly attaching the display to the motherboard.
    • Locate the ribbon assembly attaching the display to the motherboard.

  5. Use a plastic opening tool to detach the glass screen/ LED Display ribbon connector from the motherboard.
    • Use a plastic opening tool to detach the glass screen/ LED Display ribbon connector from the motherboard.

  6. Now the watch should be in three separate pieces.
    • Now the watch should be in three separate pieces.

  7. Locate the tabs on the motherboard and unclasp them.
    • Locate the tabs on the motherboard and unclasp them.

  8. Use the spugder to gently pry upwards on the motherboard. If you keep the battery attached to the upper half of the motherboard, you will have to gently pry upwards on both the battery and the motherboard.
    • Use the spugder to gently pry upwards on the motherboard.

    • If you keep the battery attached to the upper half of the motherboard, you will have to gently pry upwards on both the battery and the motherboard.

  9. Once the motherboard and the battery are removed, disconnect the battery at the connector.
    • Once the motherboard and the battery are removed, disconnect the battery at the connector.

  10. Use a spudger to  gently pry upward on the clasp connecting the battery to the motherboard. Use a spudger to  gently pry upward on the clasp connecting the battery to the motherboard.
    • Use a spudger to gently pry upward on the clasp connecting the battery to the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

36 weitere Nutzer haben diese Anleitung absolviert.

Luis Franco

Mitglied seit: 03.09.2015

1.076 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team 12-1, Blackwell Fall 2015 Mitglied von USF Tampa, Team 12-1, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G1

4 Mitglieder

5 Anleitungen geschrieben

15 Kommentare

Thanks for the comprehensive guide! Where can one purchase a Gear S compatible battery?

JG - Antwort

Hi, did you found where to buy it?

Simone -

HI , How to by a battery?

Luigi -

I'm looking for a replacement battery.

jhdownes - Antwort

Apparently you can get them in Spain.

http://www.impextrom.com/es/bateria-aa1f...

foszz - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 2

Letzten 7 Tage: 13

Letzten 30 Tage: 63

Insgesamt: 29,755